Friday, September 5, 2008

Backward Linear Prediction to Correct for Receiver Saturation

If the receiver gain is set too high the initial portion of the FID is clipped and the NMR spectrum is distorted. In such cases the spectrum should be run again with an appropriate receiver gain setting. Sometimes however, this may not be convenient as the sample may have decomposed. One way to improve the quality of the data is to take a close look at the FID, discard the initial clipped points, use backward linear prediction to calculate the discarded points and then do the Fourier transform. An example of the improvement you can expect is shown in the figure below.

No comments: